Choose the right SeneGence products

In the morning and evening, gently massage onto moist face and neck. Rinse thoroughly and follow with SeneGence Daytime or Evening Moisturizer.

In the morning and evening, gently massage onto moist face and neck. Rinse thoroughly and follow with SeneGence Daytime or Evening Moisturizer.

Morning and evening, gently massage onto moist face and neck. Rinse thoroughly.

Morning & evening, gently massage about a dime size amount onto damp face, neck, and décolletage. Rinse thoroughly. In the evening, if necessary, repeat the cleanse. Follow with Climate Control then the Microbiome Boosting Serum, and any other treatment / serum(s). Then, apply your Microbiome Defense Sunscreen Daytime Moisturizer Broad Spectrum SPF 15, or Microbiome Restorative Evening Moisturizer.

Shake well to activate. Squeeze a small amount into the palm of your hand and then spread over your entire face. Let it set about 20 seconds before removing with a warm wet washcloth. Your skin is now ready for deep cleaning with SeneGence 3 in 1 Cleanser.

STEP 1: Scoop desired amount of Deep Cleansing Balm with the spatula and apply to dry skin. STEP 2: Use fingertips to gently massage in an upward and outward circular motion. STEP 3: Using a warm, damp washcloth, wipe the balm from your skin sweeping over closed eyes to remove makeup. STEP 4: Rinse any excess with warm water. TIP: For makeup removal, gently massage onto dry skin for one to two minutes. If you have eye makeup on, lightly massage eye area until makeup starts to break down. Caution: For external use only. Avoid contact with eyes.

Gently massage onto clean, moist skin using light circular motions. Rinse well. Avoid eyes. Use twice per week or on an as-needed basis.

Apply to clean, dry skin. As you apply a generous even layer over the face, avoid the eye area. You will visibly see the gel-to-foam mask transform into foam bubbles on to the surface of the skin. Allow the bubbles to fizzle and activate on the skin for 3 to 5 minutes. After those minutes have passed, the oxygenating bubbles will be fully activated. Wet your fingertips and massage the bubbles into the skin using a circular motion. This will maximize the exfoliating benefits. Rinse well with neutral warm water or a damp washcloth. After rinsing it off, you will proceed with the remaining steps of your skincare regimen.

Before the first application, prime the pump to start the even flow. Prepare the skin for the application of subsequent products, such as serums, moisturizers, or sunscreens. Pump a nickel size (or more as desired) onto the back of your hand. Using the pads of your fingertips, palette the gel essence to the different areas of the face, neck, around the eyes, and décolletage. Apply liberally and massage into the skin using circular motions. Use AM and PM prior to applying serums, moisturizers, and EyeCrème.

After Skincare: Apply to clean, moisturized skin as your final step. Under Makeup: Use as a primer to smooth, hydrate, and extend the wear of makeup. Mix + Layer: Blend with MakeSense® Original Foundation or MakeSense® Color Correcting Tinted Moisturizer to customize your glow.

Apply 2–3 pumps to clean, dry skin morning and evening. Gently press into areas that may look hollow or sagging—like the cheeks, under-eyes, smile lines, and jawline—then smooth over the face and neck. Follow with the rest of your skincare routine.

Apply 2 pumps of SeneCell™ SenePlex+® StemCell Concentrate to clean face and neck, morning and night as your first skincare step after cleansing or exfoliating.

Dispense a few drops into hand and apply directly onto cleansed skin or mix with preferred moisturizer. May be used AM & PM. Caution: For external use only. Avoid contact with eyes.

Following cleansing, apply 1-2 pumps twice a day all over face. Follow with DayTime or Evening Moisturizer.

Following cleansing, apply 1-2 pumps twice a day. Massage gently all over face until pearls have completely absorbed. Follow with DayTime or Evening Moisturizer. On nights you use Advanced SenePlex+® Renewal Serum with Retinol, apply SeneSerum-C® in the morning only.

Apply 1-2 pumps of the product onto clean face, concentrating on areas of concern. Follow with SeneGence Evening Moisturizer. Start using every other night and increase to nightly use as tolerated. Use a broad-spectrum sunscreen with a minimum of SPF 15 and avoid sun exposure while using retinol. Caution: For external use only. Avoid contact with eyes. If contact occurs, rinse thoroughly with water. Discontinue use if signs of irritation or rash appear. Keep out of the reach of children.

After cleansing your face, dispense 2 to 4(+) pumps into hand. Apply the Microbiome Boosting Serum to your face, neck, and décolletage. Gently massage it into your skin until it is fully absorbed.

Following cleansing, apply 1-2 pumps twice a day concentrating on the mouth, eye, and forehead areas. Follow with DayTime or Evening Moisturizer. Caution: For external use only. Avoid contact with eyes.

Use twice a day, morning and night. Gently pat around the eye area, including eyelid. Avoid direct contact with eyes.

After cleansing and moisturizing, apply 1-2 pumps into the jawline, neck, and décolletage in upward motions both day and night.

Use your ring finger to stipple a small amount around the eye area, morning and evening, after cleansing and before moisturizer.

Store at room temperature. Apply following any treatments and prior to DayTime or Evening Moisturizer. Use 3-5 drops, depending on your skin needs. If product solidifies, rub into hands to liquefy before application, or gently shake before use.

Nourish your skin directly after washing with the 3 in 1 Cleanser. The DayTime Moisturizers provide moisture and act as the base upon which to apply MakeSense® Original Foundation.

After using SeneGence 3 in 1 Cleanser, use 1-2 pumps and apply evenly to the face and neck daily.

After using SeneGence 3 in 1 Cleanser, apply 1-2 pumps to the face and neck daily. Gently massage your moisturizer into the skin. Use your fingertips to press and roll after you’ve massaged it into the skin.

After cleansing your skin, take a nickel size amount of the evening moisturizer and apply it to your face, neck, and décolletage every night. Massage the moisturizer gently into your skin using circular motions. For added benefit, use your fingertips to press and roll the moisturizer into your skin after massaging.

After using SeneGence 3 in 1 Cleanser, apply a quarter size amount to the face and neck daily. Gently massage your moisturizer into the skin. Use your fingertips to press and roll after you’ve massaged it into the skin.

After using SeneGence 3 in 1 Cleanser, apply a quarter size amount to the face and neck daily. Gently massage your moisturizer into the skin. Use your fingertips to press and roll after you’ve massaged it into the skin.

After using SeneGence 3 in 1 Cleanser, apply a quarter size amount to the face and neck daily. Gently massage your moisturizer into the skin. Use your fingertips to press and roll after you’ve massaged it into the skin.

Every night or as desired, apply as your final skincare step to the entire face, neck, and décolletage. After completing your evening skincare routine and evening moisturizer, dispense about a dime size amount onto the back of your hand. Using the contoured applicator brush (not included) or clean fingertips, sweep a thin, even layer in an upward motion from the décolletage up the throat area working your way up to the face.

Generously apply nightly or as needed to clean, dry lips and leave on overnight. Overnight Lip Mask can be applied with either clean fingertips or a silicone lip mask applicator.

Apply Microbiome Defense Daytime Moisturizer SPF 15 generously and evenly as the last skincare step, 15 minutes before sun exposure. Reapply at least every 2 hours.

Use in the morning as part of your makeup application. With a small brush or clean fingertip, apply to the under eye area and softly blend down onto the cheek area and over to the outer eye.

Shake well, hold 8-12 inches (20 to 30 centimeters) from face with eyes closed, and spritz, before or after makeup, anytime you need an instant glow. Pro Tip: Spritz on collar bone and shoulders to illuminate and tone for a healthy, dewy glow.

3 in 1 Cleanser Step 1: Morning & evening, gently massage onto moist face and neck Step 2: Rinse thoroughly Step 3: Follow with SeneGence® Daytime or Evening Moisturizer DayTime Moisturizer Step 1: After using SeneGence 3 in 1 Cleanser in the AM, dispense 1-2 pumps into hands Step 2: Gently massage moisturizer into the skin Step 3: Using fingertips, press and roll after you’ve massaged it into the skin for optimal use. Evening Moisturizer: Step 1: After thoroughly cleansing with 3 in 1 Cleanser in the PM, dispense 1-2 pumps into hands Step 2: Apply generously to the face and neck. EyeCrème: Step 1: Scoop desired amount with finger Step 2: Use ring finger to stipple around the eye area in the AM and PM, after cleansing and before moisturizer. Caution: For external use only. Avoid contact with eyes.

3 in 1 Cleanser Step 1: Morning & evening, gently massage onto moist face and neck Step 2: Rinse thoroughly Step 3: Follow with SeneGence® Daytime or Evening Moisturizer DayTime Moisturizer Step 1: After using SeneGence 3 in 1 Cleanser in the AM, dispense 1-2 pumps into hands Step 2: Gently massage moisturizer into the skin Step 3: Using fingertips, press and roll after you’ve massaged it into the skin for optimal use. Evening Moisturizer: Step 1: After thoroughly cleansing with 3 in 1 Cleanser in the PM, dispense 1-2 pumps into hands Step 2: Apply generously to the face and neck. EyeCrème: Step 1: Scoop desired amount with finger Step 2: Use ring finger to stipple around the eye area in the AM and PM, after cleansing and before moisturizer. Caution: For external use only. Avoid contact with eyes.

3 in 1 Cleanser Step 1: Morning & evening, gently massage onto moist face and neck Step 2: Rinse thoroughly Step 3: Follow with SeneGence® Daytime or Evening Moisturizer DayTime Moisturizer Step 1: After using SeneGence 3 in 1 Cleanser in the AM, dispense 1-2 pumps into hands Step 2: Gently massage moisturizer into the skin Step 3: Using fingertips, press and roll after you’ve massaged it into the skin for optimal use. Evening Moisturizer: Step 1: After thoroughly cleansing with 3 in 1 Cleanser in the PM, dispense 1-2 pumps into hands Step 2: Apply generously to the face and neck. EyeCrème: Step 1: Scoop desired amount with finger Step 2: Use ring finger to stipple around the eye area in the AM and PM, after cleansing and before moisturizer. Caution: For external use only. Avoid contact with eyes.

Correcting Cleanser — Step 1: Morning & evening, gently massage onto moist face and neck. Step 2: Rinse thoroughly. Step 3: Follow with Microbiome Defense Sunscreen Daytime Moisturizer SPF 15 in the AM or Microbiome Restorative Evening Moisturizer in the PM. Microbiome Defense Sunscreen Daytime Moisturizer SPF 15 — Step 1: Apply in the morning after cleansing. Step 2: Smooth evenly over face and neck. Step 3: Allow to absorb before applying makeup. Microbiome Restorative Evening Moisturizer — Step 1: Apply in the evening after thoroughly cleansing. Step 2: Smooth evenly over face and neck. EyeCrème — Step 1: Scoop a small amount with fingertip. Step 2: Using your ring finger, gently stipple around the eye area morning & evening. Caution: For external use only. Avoid contact with eyes.

STEP 1: DEFEND Apply Climate Control to clean skin to hydrate, strengthen the barrier, and prepare skin for optimal absorption. STEP 2: PLUMP Apply 2–3 pumps of GLP Complex™ to clean, dry skin. Gently press into areas prone to volume loss—cheeks, under-eyes, smile lines, and jawline—then smooth over face and neck. STEP 3: HYDRATE Apply 2 pumps of SeneCell™ to clean face and neck to deliver deep hydration and support long-term skin renewal. Use morning and evening for best results.

Lip Line Corrector: Use serum morning and night after cleansing skin. Apply generously to fine lines and wrinkles around the lip contour and mouth. Massage gently with applicator tip until the product is fully absorbed. LipSense Moisturizing Lip Balm: Apply to bare lips to moisturize and help relieve cracks and dryness. Use as often as needed. Overnight Lip Mask: Generously apply nightly or as needed to clean, dry lips and leave on overnight. Overnight Lip Mask can be applied with either clean fingertips or a silicone lip mask applicator.

After cleansing your skin, take a nickel size amount of the evening moisturizer and apply it to your face, neck, and décolletage every night. Massage the moisturizer gently into your skin using circular motions. For added benefit, use your fingertips to press and roll the moisturizer into your skin after massaging.

The applicator has the exact shape of the LipSense wand allowing you to easily control this product corrector. Dip the wand into the Ooops! Remover, and gently rub the applicator on the area of color you wish to erase, and wipe clean with a tissue. For the easiest full removal, let Ooops!™ sit on your color for 60 seconds before you rub and wipe it away.

Use serum morning and night after cleansing skin. Apply generously to fine lines and wrinkles around the lip contour and mouth. Massage gently with applicator tip until the product is fully absorbed.

Apply to bare lips to moisturize and help relieve cracks and dryness. Use as often as needed.

Generously apply nightly or as needed to clean, dry lips and leave on overnight. Overnight Lip Mask can be applied with either clean fingertips or a silicone lip mask applicator.

Generously apply nightly or as needed to clean, dry lips and leave on overnight. Overnight Lip Mask can be applied with either clean fingertips or a silicone lip mask applicator.

STEP 1: PREP LIPS - Start with clean, dry lips. STEP 2: PREP PRODUCT- Shake LipSense vigorously. STEP 3: APPLY COLOR- For vibrant, long-lasting color apply LipSense in three thin layers. Start with lips apart. Layer One: Using the longest portion of the applicator apply from one corner to the other in one direction, maintaining separation, and no swiping back-and-forth. Let each layer set for 3 seconds before the next. Avoid touching or rubbing lips together. STEP 4: GLOSS & GO - Once layer three sets, seal color with LipSense Moisturizing Gloss for a hydrating finish. STEP 5: REMOVE - Use Ooops! Remover for color removal or touch-up. LIP TIPS: Complete your lip regimen with a LipSense® Collection (lip color, gloss, and Ooops!™ Remover). For a silky-smooth application, exfoliate with LipSmooth® Conditioning Polish. Mix and layer different LipSense® shades for custom colors. Reapply gloss throughout the day to refresh color and moisture. Embrace the mild tingling sensation as a sign of our product's disinfecting action. Lessens with regular use, as LipSense® Gloss helps restore moisture. For the easiest full removal, let Ooops!™ sit on your color for 60 seconds before you rub and wipe it away.

Apply a single layer of color. Let dry for approximately 1 minute before enjoying your finished look. Do not top with gloss. Easily removed with Ooops! Remover and a clean cotton round or cloth. For the easiest full removal, let Ooops!™ sit on your color for 60 seconds before you rub and wipe it away.

Twist up to reveal the product. Outline lips starting from the corner of the top lip. Fill in lips using a corresponding lip color shade.

Apply: Swipe directly onto clean, dry lips. Build: Add more layers for a deeper color. Wait: Allow 7–8 minutes for the tint to develop into your custom shade fully. Layer: Wear over LipSense® for extra dimension (note: the blooming effect is only visible on bare lips).

Apply to clean, bare lips anytime for sheer shine and hydration. Reapply throughout the day as needed. Wear alone or pair with your favorite LipSense® Long-Lasting Lip Liner Pencil for an on-trend, dimensional look. (Note: May affect wear time if layered over LipSense® Long-Lasting Liquid Lip Color.)

So Many Ways to Use it! After Lip Color: Apply any LipSense® Moisturizing Gloss after the final layer of LipSense Long-Lasting Lip Color to set and extend its wear. Touch-Ups: Reapply throughout the day to refresh and maintain lip color and hydration. Alone: Wear on bare lips for a natural, moisturizing look. Custom Looks: Blend and layer different glosses for unique, customized finishes.

Apply to bare lips, or if desired, top over LipSense Long Lasting Lip Color.

Apply to clean, bare lips anytime for sheer shine and hydration. Reapply throughout the day as needed. Wear alone or pair with your favorite LipSense® Long-Lasting Lip Liner Pencil for an on-trend, dimensional look. (Note: May affect wear time if layered over LipSense® Long-Lasting Liquid Lip Color.)

MinkBlush LipSense® Cream: Apply one even layer to clean, dry lips and allow approximately one minute to set. Wear alone for a velvety matte finish—no gloss needed. Remove with Ooops!™ Remover and a clean cotton round or cloth. RoseCurrant Lip Gloss: Wear alone for luminous color and hydration, or apply over LipSense® to enhance shine, lock in moisture, and extend wear. Reapply throughout the day as desired. RoseTaupe ShadowSense®: Apply to eyelids using the doe-foot applicator or an eyeshadow brush, blend immediately before the formula sets. Wear alone or layer with other ShadowSense® shades to create customized eye looks. Remove with Fooops!™ Dual Phase Color Remover. PRO TIPS: Wear each product on its own or mix and match to create a look that's uniquely yours. Pair Mink Blush, Rose Currant, and Rose Taupe for an effortlessly coordinated rosy-neutral look. Layer Rose Currant Lip Gloss over your favorite LipSense® shades to customize color, shine, and dimension. For the easiest full removal, let Ooops!™ sit on your color for 60 seconds before you rub and wipe it away.

Apply: Swipe directly onto clean, dry lips. Build: Add more layers for a deeper color. Wait: Allow 7–8 minutes for the tint to develop into your custom shade fully. Layer: Wear over LipSense® for extra dimension (note: the blooming effect is only visible on bare lips).

So Many Ways to Use it! After Lip Color: Apply any LipSense® Moisturizing Gloss after the final layer of LipSense Long-Lasting Lip Color to set and extend its wear. Touch-Ups: Reapply throughout the day to refresh and maintain lip color and hydration. Alone: Wear on bare lips for a natural, moisturizing look. Custom Looks: Blend and layer different glosses for unique, customized finishes.

Lip Line Corrector: Use serum morning and night after cleansing skin. Apply generously to fine lines and wrinkles around the lip contour and mouth. Massage gently with applicator tip until the product is fully absorbed. LipSense Moisturizing Lip Balm: Apply to bare lips to moisturize and help relieve cracks and dryness. Use as often as needed. Overnight Lip Mask: Generously apply nightly or as needed to clean, dry lips and leave on overnight. Overnight Lip Mask can be applied with either clean fingertips or a silicone lip mask applicator.

Apply LipSense® color in thin layers to clean, dry lips. Let each layer dry before sealing with gloss. Remove with Ooops! Remover when ready... For the easiest full removal, let Ooops!™ sit on your color for 60 seconds before you rub and wipe it away.

Use serum morning and night after cleansing skin. Apply generously to fine lines and wrinkles around the lip contour and mouth. Massage gently with applicator tip until the product is fully absorbed.

So Many Ways to Use it! After Lip Color: Apply any LipSense® Moisturizing Gloss after the final layer of LipSense Long-Lasting Lip Color to set and extend its wear. Touch-Ups: Reapply throughout the day to refresh and maintain lip color and hydration. Alone: Wear on bare lips for a natural, moisturizing look. Custom Looks: Blend and layer different glosses for unique, customized finishes.

So Many Ways to Use it! After Lip Color: Apply any LipSense® Moisturizing Satin Gloss after the final layer of LipSense Long-Lasting Lip Color to set and extend its wear. Touch-Ups: Reapply throughout the day to refresh and maintain lip color and hydration. Alone: Wear on bare lips for a natural, moisturizing look. Custom Looks: Blend and layer different glosses for unique, customized finishes.

Shake well to activate. Squeeze a small amount into the palm of your hand and then spread over your entire face. Let it set about 20 seconds before removing with a warm wet washcloth. Your skin is now ready for deep cleaning with SeneGence 3 in 1 Cleanser.

After moisturizing with SeneGence DayTime Moisturizer apply a thin layer to face to help skin appear smoother. Use alone or as a primer before MakeSense® Original Foundation for a flawless finish.

After Skincare: Apply to clean, moisturized skin as your final step. Under Makeup: Use as a primer to smooth, hydrate, and extend the wear of makeup. Mix + Layer: Blend with MakeSense® Original Foundation or MakeSense® Color Correcting Tinted Moisturizer to customize your glow.

After moisturizing and priming, apply MakeSense Color Correcting Tinted Moisturizer to the face using a brush, blending sponge, or clean fingertips. Blend evenly for a smooth, natural-looking finish. Layer it: For targeted correction, pair with Glowify® Microbiome Serum Primer & MakeSense Corrective Color Concealers. Set it: Finish with SeneGence Translucent Powder to reduce shine and extend wear. Build it: Need more coverage? Layer with MakeSense Original Foundation.

Apply Corrective Color Concealer before or after foundation to targeted areas using a makeup brush, sponge, or clean fingertip. Gently tap and blend for seamless correction. To neutralize redness: Apply Green sparingly to areas of visible redness, blemishes, or broken capillaries before layering concealer or foundation. Blend gently until redness appears softened. To brighten + customize: Apply White to high points of the face or under-eyes to enhance brightness and create a lifted effect. White may also be mixed with concealer, foundation, or MakeSense® Color Correcting Tinted Moisturizer to customize depth and brightness without altering undertones. To build coverage: Apply additional thin layers as desired and blend between applications. Finish with foundation or powder for a smoother, more refined-looking complexion. Pro Tip: Prime the pump before first use by pressing several times until product dispenses. Remove with Fooops!® Color Remover Liquid or Wipes.

STEP ONE: Prep–Start with a clean, moisturized, and primed face for the best base. STEP TWO: Apply–Use a brush, blending sponge, or your fingertips. Blend upward towards your hairline, downward to your jawline, and inward to your nose and eyelids for a seamless finish. PRO TIPS: Set: Use SeneGence® Translucent Powder to control shine and boost radiance. Remove: Use Fooops!® Cosmetics Liquid or Wipes Color Remover to take off your foundation, then cleanse your skin with your SeneGence® Cleanser for fresh, clean skin.

Apply to facial high points like cheekbones, temples and the nose bridge. Blend for a luminous glow.

For first-time use, pump several times until the product dispenses. Dispense onto a palette or apply a few dots directly to the cheekbones and blend. PRO TIPS: Apply on bare skin with Pearlizer for a fresh look. Use before foundation for a subtle, under-blushed effect. Apply after foundation for a pop of color. For better control, apply with a blush brush or blender sponge. Dab on the bridge of the nose, hairline, eyelids, or chin for an evenly flushed appearance. Remove with Fooops!® Color Remover Liquid or Wipes.

Swipe to Sculpt: Use the doe-foot applicator to trace under cheekbones, along the jawline, and sides of the nose for soft, lifted definition. Brush to Bronze: Blend bronzer across forehead, temples, and cheeks for sun-kissed warmth. Layer & Customize: Start light for subtle definition, build for full sculpted drama. Mix & Match Shades: Use lighter shades for natural contour, deeper shades for added depth, or combine for a multi-dimensional glow. Body Glow Bonus: Apply along collarbones, décolletage, or shoulders for a seamless, all-over radiance. Blend Seamlessly: Tap or buff with a dense brush, sponge, or fingertips. Always blend in upward and outward motions (think “lift, don’t drag”) for a lifted, natural look.

Swipe to cheekbones, brow bones, inner corners of eyes, or collarbones. Blend with fingertips or a brush. Layer for a custom glow without disturbing your base makeup.

Use clean fingertips or a brush to swirl over product. Apply color where desired on face or lips.

Use on lips and/or cheeks. Use alone, layered, or mix! A little goes a long way. For Lips: Simply swipe on with the included doe foot, let dry. Top with our Moisturizing Gloss or leave unglossed. For Cheeks: Apply a few dots and then blend out with a fluffy brush.

Swirl a cosmetics brush over the mesh opening of the jar to pick up a small amount of powder, tap off the excess, and apply where desired.

Shake well, hold 8-12 inches (20 to 30 centimeters) from face with eyes closed, and spritz, before or after makeup, anytime you need an instant glow. Pro Tip: Spritz on collar bone and shoulders to illuminate and tone for a healthy, dewy glow.

Shake well to activate. Squeeze a small amount into the palm of your hand and then spread over your entire face. Let it set about 20 seconds before removing with a warm wet washcloth. Your skin is now ready for deep cleaning with SeneGence 3 in 1 Cleanser.

Apply UnderSense to top and bottom lashes, allowing it to fully dry. You may apply several coats for buildable volume and length. Finish with LashSense mascara for even more volume and amazing color.

Use twice a day, morning and night. Gently pat around the eye area, including eyelid. Avoid direct contact with eyes.

Use your ring finger to stipple a small amount around the eye area, morning and evening, after cleansing and before moisturizer.

Remove wand from the vial and wipe off any excess product into the neck of the vial. Apply in short strokes in direction of hair growth to define shape. Can be applied on bare brows anytime, or over BrowSense color. Recommended for twice daily use for best volumizing results.

Apply LashExtend to the very base of lashes so that the solution may flow down into and between the shafts of the eye lash. Use LashExtend in the AM and PM till desired result has been achieved. Continue to use two to three times per week to maintain long luscious lashes. LashExtend should be applied directly onto skin of eyelid along the base of the eyelash after SeneGence SkinCare application and before application of ShadowSense.

Use in the morning as part of your makeup application. With a small brush or clean fingertip, apply to the under eye area and softly blend down onto the cheek area and over to the outer eye.

STEP 1: Use the included doe foot applicator or your eyeshadow brush to sweep shadow across eyelids. STEP 2: Blend and smooth. Let dry for one minute. STEP 3: Enjoy all-day eye color! Remove using Fooops! Dual Phase Color Remover*. *Fooops! Dual Phase Color Remover sold separately.

STEP 1: Shake first. Apply liner as close to the top lash line as possible. STEP 2: By applying varying degrees of pressure you can achieve a range of line styles and widths. STEP 3: For a smooth line gently hold the temple area near the tail of the eyebrow and glide the liner across the upper lash line. Hold taut but avoid pulling or tugging skin. STEP 4: To remove use Fooops! Dual Phase Remover or Color Removing Wipes. Note: Always store EyeSense Long-Lasting Liquid Eyeliner Pen tip-down so the applicator stays saturated. To prevent drying close the lid tightly immediately after applying.

The EyeSense Shimmer applicator features a fine tipped brush for complete control. Shake first. Begin to apply the color, starting with the top lid at the inside corner of the eye; with one continual stroke, line in one direction towards the outer corner. It is important to allow for ample dry time. Allow several minutes for formula to completely dry. On lower lashes - place brush on skin underneath the eyelashes and move the color in one direction. If you desire a fine line, lightly touch the brush to the skin around the eye. For a thicker more defined look, press firmly. EyeSense Shimmer shades are removed by using Fooops! Remover.

Twist the pencil to dispense or retract as needed, then apply along the lash line. For best results, apply and blend or soften one eye at a time. Depending on your desired look, you can line the upper lash line, lower lash line, and even the waterline for added definition. Pro-tips: Use a small defining smudger brush to gently soften the liner at the lash line for a more natural, diffused finish. For a sharp, winged look, an angled brush works perfectly to create a defined cat-eye. The eyeliner pencil can also be used as a base to build a bold, dramatic smokey eye. To remove eye makeup, use Fooops! Liquid Dual Phase, Remover Wipes, or Melt-Away Deep Cleansing Balm.

Apply to eyebrow. Blend out using the spoolie. Twist to retract.

Shake prior to application. Apply the color to the skin of the eyebrow using short, hair-length strokes. Once the color has been applied, use the brush end of the applicator and smooth away any excess color for even, natural coloration. If desired, repeat these steps until the desired color intensity is achieved. BrowSense shades are removed by using Fooops!® Color Remover.

Following UnderSense application, lightly stroke lashes with LashSense VolumeIntense Mascara from base of lash to tip making sure to coat all lashes, for long-lasting results. Remove with Fooops! Makeup Remover liquid or wipes.

Following UnderSense application, lightly stroke lashes with LashSense VolumeIntense Waterproof Mascara from base of lash to tip making sure to coat all lashes, for long-lasting, waterproof results. Remove with Fooops! Makeup Remover liquid or wipes.

Coat each lash using the lash wand to comb the mascara through the lashes from the base of the lash bed up to the tip. If desired apply a second coat of mascara. Allow 1-2 minutes after the 1st coat before applying the 2nd. TIP: Remove with Fooops! Color Removing Wipes OR Fooops! Dual Phase Color Remover.

Apply to key eye-areas to brighten or use as an all-over eyeshadow on lids. Blend with clean fingertips or makeup brush.

Step 1, Bond: Brush a light coat of the Blooming Bond to the underside of your upper lashes starting about 1 to 2 mm above the waterline brushing through to the lash tips. Wait 30 seconds for the Blooming Bond to get tacky. For durability and longevity, apply a second layer of Blooming Bond dotted across the base of the lash line at the 1 to 2 mm area. You don't need to coat through the lashes for the second coat of bond. Wait another 30 seconds for the Blooming Bond to get tacky. Step 2, Apply: Peel away the lash pod cover. Use the Applicator Tool to pick up a Lash Florette. Apply the Lash Florettes to the underside of your lashes, starting 1 to 2 mm above the waterline. The spines of each Lash Florette will line up next to one another across the underside of the natural eyelashes. Never apply the Lash Florettes directly to the waterline. Step 3, Fuse: The Applicator Tool is also what you will use to fuse the Lash Florettes to the natural eyelashes. Using this tool, follow the curvature of your eyelid from the outer corner to the bridge of your nose. Sandwich the top lash line within the Applicator & Fusing Tool. Gently clamp and press down to "fuse" the Lash Florettes to your natural lashes. This creates the appearance of a seamless and undetectable application. Step 4, Seal: The final step is to seal the Lash Florettes for longevity. Sealing will also remove any stickiness or tackiness from the Blooming Bond. Using the LashSense VolumeIntense Waterproof Mascara, hold the mascara wand vertical and dab lightly to the base of your lashes. Do not sweep the mascara through, just dab the mascara wand across the base of the lashes.

Step 1, Bond: Brush a light coat of the Blooming Bond to the underside of your upper lashes starting about 1 to 2 mm above the waterline brushing through to the lash tips. Wait 30 seconds for the Blooming Bond to get tacky. For durability and longevity, apply a second layer of Blooming Bond dotted across the base of the lash line at the 1 to 2 mm area. You don't need to coat through the lashes for the second coat of bond. Wait another 30 seconds for the Blooming Bond to get tacky. Step 2, Apply: Peel away the lash pod cover. Use the Applicator Tool to pick up a Lash Florette. Apply the Lash Florettes to the underside of your lashes, starting 1 to 2 mm above the waterline. The spines of each Lash Florette will line up next to one another across the underside of the natural eyelashes. Never apply the Lash Florettes directly to the waterline. Step 3, Fuse: The Applicator Tool is also what you will use to fuse the Lash Florettes to the natural eyelashes. Using this tool, follow the curvature of your eyelid from the outer corner to the bridge of your nose. Sandwich the top lash line within the Applicator & Fusing Tool. Gently clamp and press down to "fuse" the Lash Florettes to your natural lashes. This creates the appearance of a seamless and undetectable application. Step 4, Seal: The final step is to seal the Lash Florettes for longevity. Sealing will also remove any stickiness or tackiness from the Blooming Bond. Using the LashSense VolumeIntense Waterproof Mascara, hold the mascara wand vertical and dab lightly to the base of your lashes. Do not sweep the mascara through, just dab the mascara wand across the base of the lashes.

Apply directly to lids, lips, cheeks, brow bone, nose, and more. Blend with fingertips or a brush. PRO TIP: Use Pink Luster to highlight and brighten, and Roasted Coffee to sculpt and define.

Step 1, Bond: Brush a light coat of the Blooming Bond to the underside of your upper lashes starting about 1 to 2 mm above the waterline brushing through to the lash tips. Wait 30 seconds for the Blooming Bond to get tacky. For durability and longevity, apply a second layer of Blooming Bond dotted across the base of the lash line at the 1 to 2 mm area. You don't need to coat through the lashes for the second coat of bond. Wait another 30 seconds for the Blooming Bond to get tacky. Step 2, Apply: Peel away the lash pod cover. Use the Applicator Tool to pick up a Lash Florette. Apply the Lash Florettes to the underside of your lashes, starting 1 to 2 mm above the waterline. The spines of each Lash Florette will line up next to one another across the underside of the natural eyelashes. Never apply the Lash Florettes directly to the waterline. Step 3, Fuse: The Applicator Tool is also what you will use to fuse the Lash Florettes to the natural eyelashes. Using this tool, follow the curvature of your eyelid from the outer corner to the bridge of your nose. Sandwich the top lash line within the Applicator & Fusing Tool. Gently clamp and press down to "fuse" the Lash Florettes to your natural lashes. This creates the appearance of a seamless and undetectable application. Step 4, Seal: The final step is to seal the Lash Florettes for longevity. Sealing will also remove any stickiness or tackiness from the Blooming Bond. Using the LashSense VolumeIntense Waterproof Mascara, hold the mascara wand vertical and dab lightly to the base of your lashes. Do not sweep the mascara through, just dab the mascara wand across the base of the lashes.

Step 1, Bond: Brush a light coat of the Blooming Bond to the underside of your upper lashes starting about 1 to 2 mm above the waterline brushing through to the lash tips. Wait 30 seconds for the Blooming Bond to get tacky. For durability and longevity, apply a second layer of Blooming Bond dotted across the base of the lash line at the 1 to 2 mm area. You don't need to coat through the lashes for the second coat of bond. Wait another 30 seconds for the Blooming Bond to get tacky. Step 2, Apply: Peel away the lash pod cover. Use the Applicator Tool to pick up a Lash Florette. Apply the Lash Florettes to the underside of your lashes, starting 1 to 2 mm above the waterline. The spines of each Lash Florette will line up next to one another across the underside of the natural eyelashes. Never apply the Lash Florettes directly to the waterline. Step 3, Fuse: The Applicator Tool is also what you will use to fuse the Lash Florettes to the natural eyelashes. Using this tool, follow the curvature of your eyelid from the outer corner to the bridge of your nose. Sandwich the top lash line within the Applicator & Fusing Tool. Gently clamp and press down to "fuse" the Lash Florettes to your natural lashes. This creates the appearance of a seamless and undetectable application. Step 4, Seal: The final step is to seal the Lash Florettes for longevity. Sealing will also remove any stickiness or tackiness from the Blooming Bond. Using the LashSense VolumeIntense Waterproof Mascara, hold the mascara wand vertical and dab lightly to the base of your lashes. Do not sweep the mascara through, just dab the mascara wand across the base of the lashes.

Massage into wet hair and scalp. Rinse thoroughly. Follow with HairBalance Conditioner for optimal results.

Spray generously onto clean, damp hair, especially focusing on mid-length to ends of hair. Let product sit in hair for up to 1 minute before combing. Comb through and style as usual. Caution: For external use only. Avoid contact with eyes.

Apply dime-sized amount directly onto scalp with wet or dry hair every 2-3 days. Do not rinse.

Use on wet or dry hair/scalp. Apply serum directly onto scalp and hair roots daily, morning or evening. Massage with fingertips. Do not rinse.

Use on wet or dry hair/scalp. Apply serum directly onto scalp and hair roots daily, morning or evening. Massage with fingertips. Do not rinse.

Shake the can well before use. Hold the Dry Shampoo can six to ten inches (or fifteen to twenty centimeters) from your hair. Spray in mini bursts into wide sectioned pieces of hair. Mist throughout the root area. Let the spray dry. Use your fingertips or a brush to work the spray in by massaging it into the roots. Style as desired. Optional Helpful Tips: Tousle your hair to create more texture. Caution: Flammable. Do not expose to temperatures exceeding 120°F/49°C. Contents Under Pressure. Do not puncture or incinerate. Not to be used near fire or flame. KEEP OUT OF REACH OF CHILDREN.

Squeeze a small amount into the palm of your hand or onto a body poof to create a rich lather and cleanse entire body. Rinse with water. Tip: In addition to using as a body wash, try using as a shave gel and bubble bath.

Apply all over body to moisturize skin. Use after bathing with Moisturizing Body Wash and/or Smoothing Body Scrub, or as needed throughout the day.

Apply all over body onto clean skin. Massage until absorbed. Repeat daily or as needed.

Apply to hands as needed and massage until absorbed. To Reactivate Hydration: After washing hands or when skin feels dry, lightly dampen the backs of your hands and gently rub hands together to help redistribute the cream and refresh hydration—no reapplication needed. Suitable for daily use and ideal for on-the-go hydration.

Apply to clean, dry skin after sun or dry, arid exposure. Massage until absorbed. Safe for daily use. Reapply as needed. For external use only. Keep on hand for beach days, pool days, workouts, travel, and dry climates. Apply after sun exposure to help cool & comfort skin. Use during colder months to help combat dryness caused by wind, indoor heating, & seasonal changes. Pair with your Climate Control facial routine for head-to-toe hydration.

Shake well and apply to underarms. Caution: For external use only. Avoid contact with eyes. Do not apply to broken skin.

Take 1–2 capsules 30–60 minutes before bed. Start with one.

Shake the bottle gently. For Body Use: hold the bottle about 6-8 inches away. Close your eyes and spray lightly over your body, focusing on the back of your neck, bottoms of your feet, chest over lungs, and palms of your hands. Allow the mist to settle on your skin. You can gently rub it in if desired. Enjoy and rest! For Linen Use: hold the bottle about 10-12 inches away. Spray lightly over your sheets, pillowcases, blankets, pajamas, or any other linens you wish to refresh. Enjoy and rest! Store the spray in a cool, dark place away from direct sunlight. Keep out of reach of children and pets. Avoid spraying directly into your eyes or broken skin. Discontinue use if any irritants occur. Perform a patch test before applying to sensitive skin or fresh linens.

Apply directly to temples, neck, back of neck, wrists, hands, knees, or balls of feet. For External use only.

Apply at least a ½ inch strip of the toothpaste onto a soft bristle toothbrush. In the AM & PM, for up to 2 minutes, gently brush your teeth using small circular motions. Work your way slowly around your mouth, addressing every area of the teeth (outer, inside, and the chewing surface). Open wide and angle your toothbrush toward the gum line. Rinse your mouth and toothbrush. With fresh toothpaste, brush the surface of your tongue reaching as far as comfortable into your mouth. Rinse again. Follow up by flossing between all your teeth at least once a day. Do not swallow.

Shake the bottle gently. For Body Use: hold the bottle about 6-8 inches away. Close your eyes and spray lightly over your body, focusing on the back of your neck, bottoms of your feet, chest over lungs, and palms of your hands. Allow the mist to settle on your skin. You can gently rub it in if desired. Enjoy and rest! For Linen Use: hold the bottle about 10-12 inches away. Spray lightly over your sheets, pillowcases, blankets, pajamas, or any other linens you wish to refresh. Enjoy and rest! Store the spray in a cool, dark place away from direct sunlight. Keep out of reach of children and pets. Avoid spraying directly into your eyes or broken skin. Discontinue use if any irritants occur. Perform a patch test before applying to sensitive skin or fresh linens.

Apply directly to temples, neck, back of neck, wrists, hands, knees, or balls of feet. For External use only.

Directions for each item are on its own card.

• Beauty Sleep Spray with Magnesium & SenePlex+®
• Beauty Sleep Stick with Magnesium & SenePlex+®

Directions for each item are on its own card.

• Sweet Relief Spray with Magnesium & SenePlex+®
• Sweet Relief Stick with Magnesium & SenePlex+®

Apply one layer of color. Let dry. Apply second layer of color. Let dry. For best results, apply SeneGence 2-in-1 Base & Top Coat prior to applying Nail Polish, and top finished color with a layer of 2-in-1 Base & Top Coat.

Apply one coat, let dry. Apply second coat, let dry. Use on its own, or as a topper over nail polish color.

Apply one layer of color. Let dry. Apply second layer of color. Let dry. For best results, apply SeneGence® 2-in-1 Base & Top Coat prior to applying Nail Polish. Finish with 2-in-1 Base and Top Coat.

Apply one layer of color. Let dry. Apply second layer of color. Let dry. For best results, apply SeneGence® 2-in-1 Base & Top Coat prior to applying Nail Polish. Finish with 2-in-1 Base and Top Coat.

REACTIVATING HAND CREAM Apply to hands as needed and massage until absorbed. To Reactivate Hydration: After washing hands or when skin feels dry, lightly dampen the backs of your hands and gently rub hands together to help redistribute the cream and refresh hydration—no reapplication needed. Suitable for daily use and ideal for on-the-go hydration. NAIL POLISH Apply one layer of color, let dry, then apply a second layer. For best results, apply the 2-in-1 Base & Top Coat before color, then seal with a final layer.